| Actel Core10/100 10/100 Mbps IP Core for procut development of Ethernet MAC with Host Controller |
|
Ethernet Media Access
Controller that connects Local Area Networks at data rates of 10 or 100
Mb/s. It has a Media Independent Interface (MII) for physical
connection and implements Carrier Sense Multiple Access with Collision
Detection (CSMA/CD) algorithms per IEEE 802.3.
Key Features:
- Supports 10/100 Mbps full/half duplex operations
- Supports CSMA/CD defined by 802.3 standard
- Host Interface with DMA Control
- Supports 8, 16 and 32-bit host interface
- DMA has Scatter/Gather capabilities
- Supports 802.3 Media Independent Interface
- Supports Actel's ProASICPLUS and Axcelerator device families
- 81% Utilization in Actel's APA300
- 56% Utilization in Actel's AX500
|
|
| Actel Core1553BBC MIL-STD-1553B Bus Controller |
MIL-STD-1553B is a
command/response, time-multiplexed serial data bus used in aircraft,
military vehicles, and severe control environments. Core1553BBC
provides a complete, MIL-STD-1553B Bus Controller (BC), and has similar
functionality to other common bus control solutions. Actel provides
everything needed to incorporate one or more 1553B cores into a system
design. Key Features: - Single-Chip, Radiation Tolerant MIL-STD-1553B Compliant FPGA Solution
- Supports up to 128kbytes of Internal or External Memory
- Synchronous or Asynchronous Backend Interface
- Interfaces to Standard External Transceivers
- Selectable 12, 16, 20, or 24 MHz System Clocks
- Certified per RT Validation Test Plan MIL-HDBK-1553 Appendix A
- Supports RTAX-S, RTSX-S, ProASICPLUS, SX-A, Axcelerator, MX, and ACT3 Product Families
|
|
| Actel Core1553BRT-EBR 1553EBR Remote Terminal |
|
SAE AS5682 is a 10 Mbps
command/response, dual redundant, enhanced bit rate (EBR),
time-multiplexed serial data bus used in aircraft, spacecraft, military
vehicles, and severe control environments. Core1553BRT-EBR provides a
complete, 1553EBR Remote Terminal (RT), and is compatible with legacy
remote terminal systems and supports standard off-chip RS485
transceivers. Key Features: - Single-Chip, Radiation Tolerant SAE AS5682 Compliant FPGA Solution
- Fail Safe State Machines for Space and Avionics Applications
- 100% Statement and Branch Code Coverage
- Encoders and Decoders Operate off 100 MHz Clock
- Protocol Control and Memory Interface Operates off 50 MHz Clock
- Interfaces to Standard External RS485 Transceivers
- Memory Address Mapping Allowing Emulation of Legacy Remote Terminals
- Programmable Mode Code and Sub-Address Legality Check
- Protocol
Control Derived from Core1553BRT, which is Certified to MIL-STD-1553B
(RT Validation Test Plan MIL-HDBK-1553, Appendix A)
- Supports RTAX-S, Axcelerator, ProASIC3/E, and ProASICPLUS Product Families
|
|
| Actel Core3DES 3DES Encryption and Decryption |
IP Module - Core3DES
Description: Core3DES - Implements triple DES to NIST FIPS PUB 46-3
- Supports 168-bit key size
- Fastest data rate is on Axcelerator at 167 Mbps
- Encryption and decryption with same core
- Includes parity checking logic for cipher key
- 48 clock cycle operation for 64-bit data encryption/decryption
- Netlist, RTL and evaluation versions available
- Supports Axcelerator, ProASICPLUS, and SXA
- 39% utilization on an AX125
- 22% utilization on APA150
- 28% utilization on A54SX32A
- 27% utilization on RT54SX32S
|
|
| Actel Core8051 8-bit FPGA based Microprocessor - 100% ASM51 compatible |
Core8051 is a soft IP version of the 8-Bit 8051 Microcontroller that is ASM51 Compatible. At one clock per instruction Core8051
runs much faster and has substantially increased throughput compared to
the original 8051 implementations. The core can be used to run programs
written for the 8051 without change, and is compatible with the
existing 8051 tools. Core8051 supports 13 interrupts and has a
UART, 2 counter/timers, and 4 8-bit ports. The SFR bus is fully
supported and up to 101 external SFRs can be added
|
|
